Volvo RWD 444-544 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2009 444-544 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Rear Wheel Cylinder – 63 PV544 444-544

posted by  jk63pv544 on  Fri Mar 23 21:29 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 1 06:04 CST 2014
[RELATED]

Has anyone purchased the CENTRIC Part # 13439000 wheel cylinder from Rock Auto or from any other source? It is identified as the required part for a 1963 PV544. Did it fit?

The bore size of the Centric wheel cylinder is stated as 25 mm. My wheel cylinder bore is 21.5 mm. The port size of 3/8 -24” is the same on my cylinder along with the bleed port of ¼-28”. Unfortunately the distance between mounting bolt locations is not indicated. If it fits the somewhat larger bore size should not be an issue.

I tried the local auto parts supplies in Hamilton, Ontario and Autozone in Buffalo NY, but non of them listed a part.

Most of the online stores show the Centric wheel cylinders and would like to order it but if it will not fit, I will be no further ahead.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Rear Wheel Cylinder – 63 PV544 [444-544]
posted by  jk63pv544  on Fri Mar 23 21:29 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.