Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2005 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

'85 740T w/ M46 - New Clutch Fork and now Very High Engagement 700

posted by  MisterBLC on  Sat Mar 31 21:46 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Aug 26 14:55 CST 2014
[RELATED]

Everyone,

I have been working on a '85 740T which recently had its clutch fork and ball pivot replaced (along with the clutch disk and the slave cylinder). This is an M46 w/ hydraulic clutch. I have now been driving it and the engagement is very high up, right at the beginning of the pedal travel. It seems to drive fine but the engagement right at the top is a little akward and I am worried that I might run the clutch disk if it is slipping slightly. Any ideas on what to check that might be causing the high engagement? Possibly some issue with the new fork?

Thanks in advance!
Brian






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New '85 740T w/ M46 - New Clutch Fork and now Very High Engagement [700]
posted by  MisterBLC  on Sat Mar 31 21:46 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.