Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Removing Fuel Lines From Fuel Rail 200 1989

posted by  stogeyman on  Mon Apr 16 07:55 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Jun 13 18:07 CST 2014
[RELATED]

I'm having a hell of a time trying to unscrew the fuel lines from my fuel rail. Any advice on making it happen? I already bent 1 connector so I got smart and I'm using 2 wrenches and have soaked the things over night in PB Blaster. I'll ultimately get this seperated (I think) but I'm working this hard with the rail OUT of the car. I'm wondering how the hell I'm going to do it while it's on the engine! Any advice is appreciated.

For those who love details. My car has almost 300k miles and I decided to not just put new seals on the injectors, I'm rebuilding them. So I snagged a rail and injectors from Crazy Ray's, cut the hoses, and will clean and refinish the rail, install a new regulator, rebuild my injectors and then swap in the entire thing.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Removing Fuel Lines From Fuel Rail [200][1989]
posted by  stogeyman  on Mon Apr 16 07:55 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.