Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

A/C inop on my 1992 245 200 1992

I have just purchased the car. Previous owner said that the AC "just stopped" working one day, about 3 years ago...
With the car running and AC switch engaged, I am only able to read about .5v on the wire going to the compressor. Where is the best place to look? AC compressor is obviously not engaging.
Any/all help greatly appreciated!

I have read about the printed circuit board and the relay but am not sure which direction to go in. Relay just turns on the fan if it isn't already correct? So if I have the fan on, I would be bypassing the relay anyways yes/no?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New A/C inop on my 1992 245 [200][1992]
posted by  the65dartguy1  on Mon Apr 16 12:54 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.