Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2005 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Replaced control arm bushings - but getting a klunk 700

posted by  DPNY on  Mon Apr 23 08:43 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Sep 18 18:45 CST 2014
[RELATED]

Hi,

I recently had my control bushings replaced with a kit from IPD #101739.
http://www.ipdusa.com/products/5303/101739-front-bushing-kit-rubber

I got an alignment after the bushing kit install. And the car drove really well - it drives better.

But there is a clunk sound that is very specific. It is clearly coming from the bushings and I think it is the inner control arm stay bushing - the cylindrical insert. The clunk occurs under slow speed when making a tight turn left or right. I can just about feel the clunk in my feet as it comes through the floor pan.

Has anyone had issues with this kit from IPD?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Replaced control arm bushings - but getting a klunk [700]
posted by  DPNY  on Mon Apr 23 08:43 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.