Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

burning oil....good compression...valve stem seals or rings? 200

Hello all I'm about to do a valve stem seal job, but I don't want to waste my time if it won't fix my problem. I've read a lot of mixed thoughts on various forum postings via Google search and some people swear there is no way valve stem seals on the 240 will cause excessive oil consumption and lots of smoke. On the other hand I had my compression tested by a volvo certified mechanic and it was great, 155-170 Across all cylinders. How else would it burn oil so bad there's a smoke screen if I let off gas and.then punch it ? My only idea is valve stem seals. Has anyone ever had burning oil and smoke and found the culprit to be the seals? Or is it not logical?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New burning oil....good compression...valve stem seals or rings? [200]
posted by  someone claiming to be volvo2421980  on Thu May 24 02:50 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.