Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Brake Junction Box Diagnosis and Rebuild?? 200 1977

posted by  DIDENPX on  Sat Jun 9 15:59 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Sep 29 19:43 CST 2014
[RELATED]

Restored a 1977 242DL to include all new (rebuilt) calipers. Unable to bleed brakes and pedal goes straight to the floor.

No/very little fluid reaching upper chamber of passenger side front caliper. Disconnected that line where it originates at the brake junction box and no fluid is making its way out of that port on the junction box. Others all seem fine.

I assume this means my brake junction box needs replacing, right?? Expensive part so I figured I'd ask first. Also, is there any way to rebuild this part on a DIY basis? What causes them to fail like this?





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Brake Junction Box Diagnosis and Rebuild?? [200][1977]
posted by  DIDENPX  on Sat Jun 9 15:59 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.