Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Front trailing arm bushing removal suggestions 200 1986

I recently replaced the rear trailing arm bushings on my sedan with it on the car. No real issues doing that project. Found that the PS front TA bushings it split and there is alot of play on that side. I know I will have to remove the entire TA from the car, but I was wondering, short of taking it down and having the bushing pressed out then back in, is there an esay 'homebrew' way of doing it myself? I'd appreciate any and all suggestions.

Thanks.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Front trailing arm bushing removal suggestions [200][1986]
posted by  Xraybob  on Tue Nov 13 16:50 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.