Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2015 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Turn wheel, horn stops working; smack wheel- fixes it 700 1990

Hey lovely people.


My horn works fine, so long as I don't turn the wheel. Once I do, it stops working. This has gotten progressively worse over the years. I initially thought it was dirty contacts at the horn, then bad contacts in the buttons, but finally this surfaced. At some point, I checked the connection that feeds from the windshield wiper switch to the horn buttons, and it didn't seem at all suspect.

I have the ABS wheel, and there is a big fat padded spot on the "shaft". I'm not hitting the ring, I'm hitting the soft plastic between the airbag (yikes) and the hard-plastic cover for the cruise/signal/wiper controls.

Smacking the wheel brings the horn back until I turn the wheel at all. I think I should replace the wiring, but don't know how it's routed. Any help?

Cheers






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Turn wheel, horn stops working; smack wheel- fixes it [700][1990]
posted by  Will740turbo subscriber  on Thu Nov 15 02:10 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.