Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

re: 87 245 auto - 50 ft extension cord for 20amp 8/3 question 200 1987

posted by  Swedish Baklava on  Sun Nov 25 11:47 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 06:40 CST 2014
[RELATED]

Hi All,

I need a 50 foot long extension cord for 20amp for my HFT MIG welding machine.

http://www.harborfreight.com/welding/mig-flux-welders/wire-welder-90-amp-flux-68887.html

Now, there is a twist, my 20amp mig welder has a plug end that looks like 15amp plug.
Also, my mig weld manual recommends 8AWG...

I can find a 50ft long, 20amp, plug receive either 15/20amp and 10AWG but not ones they are asking for....

Yellow Jacket 2991 20-Amp Generator Cord with T-Blade 5-20 Lighted Ends, 50-Feet
http://www.amazon.com/Yellow-Jacket-2991-Generator-T-Blade/dp/B000HEC2DW/ref=sr_1_1?ie=UTF8&qid=1353863729&sr=8-1&keywords=20amp+extension+cord

I went to HFT/Home Depot/Acer and spoke with several guys, they thought 8AWG is overkill and I can weld it with 10AWG but they don't sound too confident. What should I do? Just use 10AWG? And some companies make 10AWG for 15amp but some do make 10AWG FOR 20amp. What??? Help. Thank you as always.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New re: 87 245 auto - 50 ft extension cord for 20amp 8/3 question [200][1987]
posted by  Swedish Baklava  on Sun Nov 25 11:47 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.