Volvo RWD 444-544 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2004 444-544 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Valve gear on a B 18 444-544

posted by  gabbiano on  Fri Jan 25 19:31 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Sep 29 20:18 CST 2014
[RELATED]

Can't remove the lifters: they seem to be coked badly on the lower ends, and I can't pull them out. OK to send the block to the machine shop hot tank and have them boil it to loosen things up? What about remove the cam and hope the lifters will fall out toward the bottom? They move freely when the cam turns.

How to pull the fiber cam gear? I don't want to destroy it (lash was 0.004, which isn't the worst thing in the world) and new ones aren't cheap...

Thanks to all!

Al






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Valve gear on a B 18 [444-544]
posted by  gabbiano  on Fri Jan 25 19:31 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.