Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

bottom bolts on auto gearshift assembly 200 1993

posted by  robbmcc on  Thu Jan 31 12:05 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 08:41 CST 2014
[RELATED]

Anybody ever had to tighten the 3 bolts that hold the gearshift to the bottom of the cup it sits in? Any advise on tools and/or approach? I'd rate those as in the catagory of getting the oil return line off the bottom of the turbo on my 92 740. I was able to get some long needle nose to snug them slightly but I just know in 19 years they'll be loose again. I supposed it would be easy just to drop the driveshaft right there to get to them. Anybody done that?
Thanks,
Robb






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New bottom bolts on auto gearshift assembly [200][1993]
posted by  robbmcc  on Thu Jan 31 12:05 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.