Volvo RWD 444-544 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2010 444-544 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Rust Pits - Lead Covered 444-544

posted by  jk63pv544 on  Tue Feb 5 06:41 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 1 06:04 CST 2014
[RELATED]

Considering lead over large rust pitted areas after sandblasting panels/body

Anyone here done this? If so, what’s a good source of lead and lead paste (I know, there is always Eastwood, but I’d like to try local first).

I did some lead work on my gas tank with plumbing solder and it came out really good. I also looked at some videos on applying lead and think I’d like to try it.

Some of my body panels have larger pitted rust area, especially around the trim support holes, but the there is still plenty of steel structure. By filling in the area, I would not be taking away any more steel and still fill/level the panel.

Any thoughts, recommendations on the subject?





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Rust Pits - Lead Covered [444-544]
posted by  jk63pv544  on Tue Feb 5 06:41 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.