Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Intake hose and flame trap kit '88 245 200

posted by  AlaskanPrincess on  Sat Feb 16 18:46 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Jan 7 15:38 CST 2014
[RELATED]

Noobeee again :) Yet another issue with the 1988 245 DL
I noticed a hose that's 'not connected' and was able to determine it's the air intake hose. Not sure if it needs to be replaced but I'm thinking it needs to be secured, somehow.
So, I ordered air intake hose, and flame trap kit. Which of course brings me to questions - can I replace any of these (skill level virtually zero!) myself?
I'm guessing at a minimum I need to at least 'secure' the hose (either the old one or the new one) even if I should attempt flame trap kit.
Tools needed? Anything else I 'should' replace at same time?
In this situation, any photos or step-by-step directions would be really helpful and appreciated :)
Thanks again!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ANSWERED Intake hose and flame trap kit '88 245 [200]
posted by  AlaskanPrincess  on Sat Feb 16 18:46 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.