Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2008 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Brake lines and under/over sized wrenches? 900

posted by  The Rod on  Mon Mar 18 07:00 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 12:15 CST 2014
[RELATED]

Fought the brake line battle yesterday and won. But it was a hell of fight that I won by the slimmest of margins. MAP Gas, PB Blaster, flare wrench. And still the nut on the hard line gave way only after starting to round off. Which lead me to thinking, does anyone make "undersized" wrenches? I had a collection of 11mm and 7/16 wrenches to choose from and while some fit tighter than others I kept thinking they all felt a little loose on the nut. Is there a slightly smaller fraction that works ie 13/32"? 10.75mm? I had wrenches ranging from ancient made in USA to a brand new Craftsmen that look pretty beefy so I don't think they are just opening up on me...thoughts beyond buy a Snap On?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Brake lines and under/over sized wrenches? [900]
posted by  The Rod  on Mon Mar 18 07:00 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.