Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2008 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Breather Box 200 1989

posted by  B0RK ^3 on  Fri Apr 5 20:05 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 15 18:09 CST 2014
[RELATED]

Been having problems with my flame trap assembly. Got the cheap-o ScanTech trap and bottom hose, now the bottom hose is cracked and probably worthless. Now Im thinking the OEM Volvo route is the way to go. But its expensive.. So to speak. Now what about the breather box? How difficult is that to change out? Do you have to take off the throttle body to get at it? Does it matter if you get an aftermarket? Or should you really get the more costly OEM? Any opinions? Thanks again.. Bork III






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Breather Box [200][1989]
posted by  B0RK ^3 subscriber  on Fri Apr 5 20:05 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.