Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2005 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

1995 960 Blower Motor Replacement 900 1995

uid 11021's pic
posted by  dewfpo on  Sun Apr 14 14:23 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 18:34 CST 2014
[RELATED]

I've got the 3 screws that hold the blower motor out, and the fan is free but can't be pulled out no mater how much I twist it due to a large, H.D. brace directly behind it at the 5-6 o'clock quadrant of the motor. The metal knee bolster bracket bolts to one side of the cast metal brace. It fairly substantial and don't know (can't see) what it's mounted to.

I'm so close yet so far.

Any tips for how to get it out? Even if I remove the two large bolts that hold the knee bolster bracket to it, that only frees up about 1/4 inch and it looks like that large cast metal brace may need to come out.

Anyone else do this? Your advice is welcome.

Thanks, DEWFPO
--
1998 S90 088,900 and 1995 964 154,100






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1995 960 Blower Motor Replacement [900][1995]
posted by  dewfpo  on Sun Apr 14 14:23 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.