Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2002 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Gas tank strap replacement - help, how to pull staps tight? 700 1990

posted by  garlandw on  Sat Apr 20 17:16 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Sep 10 08:58 CST 2014
[RELATED]

Folks,

Need a little help here. Following the faq, I removed the remains of a rusted out gas tank strap on my 1990 740. Installation of the strap should be just the reverse of the procedure but not so. Got the front loosely buttoned up but I can't get enough tension on the strap to line up the bolt holeat the rear. Gas tank is near empty and the other strap is intact. Tried bolting up the rear end first and inserting the front of the strap into the slot (retainer bracket loosened) but still could see no way to put tension on the strap to line up the holes. I can line it up using a large Philips head screwdriver - so it does fit. But of course I can't put thelast bolt in with the screwdriver in the way. What am I missing?

Bill






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Gas tank strap replacement - help, how to pull staps tight? [700][1990]
posted by  garlandw subscriber  on Sat Apr 20 17:16 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.