Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Advice/Experience on Replacing Fuel Return Line-Hard Line 200 1990

posted by  1990Volvo240 on  Thu May 2 14:53 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 3 13:18 CST 2014
[RELATED]

Hi,

I need to replace the hard green (steel?) part of the fuel return line.

My questions-

Should I:

1. Replace the ENTIRE line from fuel rail to fuel in tank with fuel hose (cut off at in-tank connection)-regular fuel hose or fuel injection hose? I would probably also need new hose chassis clamps to affix hose to underbody as the plastic factory chassis clamps are small.

2. Replace with steel line? If so I'll need additional tools.

And if replacing with fuel hose, am I right in that 5/16" hose can be used?

Thanks,

Travis





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ANSWERED Advice/Experience on Replacing Fuel Return Line-Hard Line [200][1990]
posted by  1990Volvo240 subscriber  on Thu May 2 14:53 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.