Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2003 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

740 Belly pan / Skid Plate bolt size? 700 1990

Does anyone know the right size for the bolts for the belly pan aka skid plate aka splash guard etc.?

I bought some M6x1.00 bolts and they do not come close to fitting any of the holes. There are two small holes in the frame on the side, and I can tap those to fit M6x1.00, but the rear holes seem like they're at least M8 bolts. Little help?

Cheers






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 740 Belly pan / Skid Plate bolt size? [700][1990]
posted by  Will740turbo subscriber  on Wed May 22 18:07 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.