Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2010 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1983 242 Reverse does not work when COLD 200 1983

posted by  Kevinger on  Mon Sep 2 13:42 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Sep 4 10:41 CST 2013
[RELATED]

I have a 1983 242 Turbo. The reverse does not work until the unit is HOT. The Drive works fine in all gears when cold except Reverse. The transmission shifts great under pressure and no slippage.
* When the Reverse does start working when warm/hot it does seem to shift very hard into reverse. I suspect that is the drive shaft Rubber joint OR possibly the transmission mount.
* Reverse lights also do not work and are under the list of issues I am dealing with on this car for the time being.
* Also had an alternator/charging issue. Replaced alternator, battery, accessory mounts and belts. (AC belt removal was confusing and not well shown) It came down to a problem with a GROUND at back of engine on valve cover.

Valve cover leaks at each nut connection. No washers on any and put some spares on. Hopefully will fix this.
Kevin






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1983 242 Reverse does not work when COLD [200][1983]
posted by  Kevinger  on Mon Sep 2 13:42 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.