Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2018 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Left caster is zero - strut incorrect? 200

I had an alignment and the caster is 0-degrees on the left and 2-degrees on the right (should be 4-degrees each). The car drives fine (a little light steering). Sure enough, the wheel base is 103.25-inches on the left and 103.6-inches on the right. Does anyone know if installing a strut wrong can cause this?

I ask because I saw in a 760 Green book that struts one way give 5-degrees caster but installed wrong can give 3-degrees. (I don't have a 240 green book.) The strut tops certainly look asymmetrical in the tower openings (like the wrong 760 example) but I assume this is to set camber. Is camber adjustment the purpose of the three notches on the tower plate?

Thanks,

Tom






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Left caster is zero - strut incorrect? [200]
posted by  sideswipe  on Mon Sep 23 20:04 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.