Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2024 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

ICU Connector LH 2.2 200 1986

posted by  dcooledge on  Thu Mar 13 12:12 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Sep 9 07:48 CST 2014
[RELATED]

I removed the ICU connector to test the resistance between the connector and the various components. I've read about the "sleeves" and it appears that the sleeves remained in the connector. Should I just leave them in there? Also, there was a lot of greasy goop in the connector. It was a brownish color, like oil, but I suspect it was dielectric grease. Could this mean that the connector was removed once before or did it come from the factory like this:






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.