Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Change out Hall Distributor for Bosch? 200 1983

posted by  davegcc on  Mon May 19 16:26 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Aug 18 16:27 CST 2014
[RELATED]

have an 83 245 with a Hall distributor (white cap). The distributor is noisy in the car and somewhat problematic for me. I would like to replace with a Bosch unit.

I have a spare distributor off both an 88 and a 90; will either or both of these work on my car? One of the spare distributors has a wire connector to receive a connection from the engine harness I gather; the other does not. In looking at my 83, there is a black wire which comes into the side of the distributor, but not the same type of connector as the Bosch distributor I have woudl receive.

Appreciate any advice anyone has on changing the distributor out and if it is even possible.

Thank you





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Change out Hall Distributor for Bosch? [200][1983]
posted by  davegcc  on Mon May 19 16:26 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.