Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

960 PCV problem 900 1995

posted by  brickbreaker on  Tue Jun 24 16:37 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Jul 16 22:59 CST 2014
[RELATED]

I just replaced the PCV system complete on my 1995 960. While I had the intake manifold off, I cleaned out the EGR passage, there was a lot of gunk. Put everything back together, and the engine purrs. But I still get smoke blowing out of the oil fill and dipstick. Also, code 2-4-1 is set showing a problem with the EGR. Any ideas what is happening? I am especially disappointed that the PCV system is not operating.

Thanks for all your help. I have learned a lot from you over the years.

Tom L.
'92 240 250,000 miles
'95 960 184,000 miles and still going.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 960 PCV problem [900][1995]
posted by  brickbreaker  on Tue Jun 24 16:37 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.