Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2019 900 INDEX

[<<] [>>]

VIEW

REPLY TO THIS MESSAGE

SAVE

head re-surfacing specs 900 1994

posted by The Iron Chef on Sun Jul 6 14:36 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS]

[IGNORE ALL POSTS]

last visit: Thu Sep 25 16:11 CST 2014

[RELATED]

Hello all. It,s head gasket time for my 94 945 Regina car (206k). Initial inspection of the head flatness,using a straight edge and feelers reveled about .013",.33mm depression between #2 & #3 cylinders.
So, question #1: what is the max allowable amount of material that can be removed when resurfacing this head. I'll be doing all the machining my self. I hope to post photos if time allows.
Question #2: can I TIG weld fill the small areas of corrosion on the head face that are similar (in shape and location) to the water jacket passages? I may just leave them alone.
Thanks in advance,

- Keith

THREADED

THREADED EXPANDED

FLAT

PRINT ALL

MESSAGES IN THIS THREAD

head re-surfacing specs [900][1994]
posted by The Iron Chef on Sun Jul 6 14:36 CST 2014 >

head re-surfacing specs [900][1994]
posted by spook on Sun Jul 6 15:18 CST 2014 > V

head re-surfacing specs [900][1994]
posted by trichard on Sun Jul 6 16:43 CST 2014 > V

head re-surfacing specs [900][1994]
posted by Chris Mullet subscriber on Mon Jul 7 07:33 CST 2014 > V
- Good stuff [900][1994]
  posted by The Rod on Mon Jul 7 09:08 CST 2014 > V
- Thicker Gasket [900][1994]
  posted by lucid subscriber on Mon Jul 7 09:34 CST 2014 > V

head re-surfacing specs [900][1994]
posted by The Iron Chef on Fri Jul 11 17:36 CST 2014 > V

head re-surfacing specs [900][1994]
posted by The Iron Chef on Thu Jul 17 20:13 CST 2014 > V
- head re-surfacing specs [900][1994]
  posted by spook on Fri Jul 18 04:42 CST 2014 > V
  - head re-surfacing specs [900][1994]
    posted by The Iron Chef on Sat Jul 19 14:43 CST 2014 > V
- head re-surfacing specs [900][1994]
  posted by machine man subscriber on Sun Jul 20 16:58 CST 2014 > V
  - head re-surfacing specs [900][1994]
    posted by The Iron Chef on Mon Jul 21 10:51 CST 2014 > V
    - head re-surfacing specs [900][1994]
      posted by machine man subscriber on Tue Jul 22 00:46 CST 2014 > V
      - head re-surfacing specs [900][1994]
        posted by The Iron Chef on Tue Jul 22 05:21 CST 2014 > V

head re-surfacing specs [900][1994]
posted by vacuumhead on Fri Jul 18 06:45 CST 2014 > V
- head re-surfacing specs [900][1994]
  posted by The Iron Chef on Sat Jul 19 14:51 CST 2014 > V

head re-surfacing specs [900][1994]
posted by The Iron Chef on Sun Aug 17 08:52 CST 2014 > V
- head re-surfacing specs [900][1994]
  posted by The Iron Chef on Mon Aug 18 07:15 CST 2014 > V

head re-surfacing specs [900][1994]
posted by The Iron Chef on Thu Sep 18 13:12 CST 2014 > V

<< < > >>

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

Volvo RWD/900 Forum Index

Community Forums:

RWD

AWD

GATHERINGS

OPINIONS

PICKNPULL

V8

STORIES

Classifieds

Site Features

RWD Series/Models

AWD Series/Models

Volvo RWD 900 Forum

head re-surfacing specs 900 1994