Volvo RWD 444-544 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2003 444-544 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Brake Light Pressure switch issues 444-544 1964

uid 15053's pic
posted by  Dylan Berichon on  Sun Jul 20 14:36 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 17:22 CST 2014
[RELATED]

Hi all!

I've now replaced the brake light pressure switch on my '64 544 a couple of times in the past 7 or 8 months because the brake lights don't really work in a "real life" situation.

The last switch worked fine for a bit, sorta. There was always a slight delay for the lights coming on, and that's okay as long as they work.

What's now happening is that sometimes the brake lights will come on when they are supposed to, other times the lights won't come on unless I jam the pedal down to the floor with extreme force (IE: a totally unrealistic braking situation.) The previous switch just stopped working entirely.

Am I not doing something correct with these things? I feel like they should last more than 3 - 4 months at a time. Are some switches made better than others?

Any other creative solutions to this? The switch install isn't all that difficult, but bleeding the brakes has started to get a little old.

Thanks all!
--
http://dylans544.blogspot.com






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Brake Light Pressure switch issues [444-544][1964]
posted by  Dylan Berichon  on Sun Jul 20 14:36 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.