Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2014 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Water pump replacement, (forgot thread sealant) 900

posted by  rdelaney on  Mon Jul 28 17:40 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Aug 13 19:06 CST 2014
[RELATED]

I just finished replacing the water pump on a 940 and realized I did not use thread sealant on the three bolts, I did use it on the two studs I replaced. The FAQ says to use sealant on the bolts as some protrude into the water jacket. But at another part in the FAQ it says to use anti seize. So now I am wondering if I should pull it apart and use sealant? I replaced a pump on a my 760 ten years and at least 60000 mile ago and I don't believe I used sealant on the bolts and it is still going strong but this car is a friends and I want to be sure I do it correct for him. I have not added water and tested it yet. Any advise appreciated.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Water pump replacement, (forgot thread sealant) [900]
posted by  rdelaney  on Mon Jul 28 17:40 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.