Volvo RWD 1800 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2003 1800 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Replacement of Turn Signal Switch 1800 1970

posted by  Dave B on  Sun Sep 7 10:37 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Sep 26 19:07 CST 2014
[RELATED]

My TS switch won't stay engaged very well while turning left. Very touch and easily pops out of engagment before the turn is completed. I have a replacement and I think I looked at this some years back and determined that I'd have to drop the steering column to get at it. That involves grinding slots into the smooth heads of the two retaining bolts, or grinding off the heads.

Is there a simpler way to do it? Can anyone give me a step-by-step on this job?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Replacement of Turn Signal Switch [1800][1970]
posted by  Dave B subscriber  on Sun Sep 7 10:37 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.