Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

heater/coolant hardline 900

posted by  jaydee on  Sun Oct 12 20:16 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 23:45 CST 2014
[RELATED]

I am replacing the blown engine (original to the car) in my 91 940T. The replacement engine is a 1994 B230FT. It is sitting on a stand waiting to be installed. I was sitting, gazing in wonderment at this marvel of engineering, when I noticed that, Hey!, the hard pipe from the water pump back under the turbo and around the corner to the upper heater hose has an extra outlet! I checked my manual(s), and can't find any reference to this extra piece of pipe. It is located just behind the oil filter extension and is about 3 inches long, designed to accept a small hose ( one inch?), and comes off the hardpipe at 90 degrees. Can someone tell me what this was for? Obviously I will not need it, and I am thankful I did not throw away any parts off the old engine, but I am curious as to what this was for.
Thanks!
JD






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New heater/coolant hardline [900]
posted by  jaydee subscriber  on Sun Oct 12 20:16 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.