Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2005 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

round tooth square tooth, IPD cam gear. 900

posted by  jaydee on  Wed Oct 22 20:03 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 23:45 CST 2014
[RELATED]

I am replacing the blown motor in my 91 940T with a "new" engine from a 1993/4 940T. I removed the IPD adjustable timing gear (square cut teeth) from the 91, and intalled it on the 93/4 cam nose, and found that I am unable to install the round tooth belt, as the intermediate and crank sprockets on the 93/4 are round tooth. The round tooth belt will not fit over the IPD adjustable cam gear. Can I safely run a square tooth belt on the 93/4 engine with round tooth crank and intermediate sprockets, and the square tooth timing gear?
Thanks!!
JD






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New round tooth square tooth, IPD cam gear. [900]
posted by  jaydee subscriber  on Wed Oct 22 20:03 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.