Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

How to remove the strut assembly safely when the shock top nut has stripped out of the strut tube? 200 1993

posted by  drj434343 on  Sun Feb 15 23:18 CST 2015
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 24 09:46 CST 2013
[RELATED]

I am in the unfortunate situation of discovering that the shock tube top nut of my front passenger side strut tube assembly has stripped out and is loose around the shock. This allows the shock body to slide freely in and out of the strut tube while driving. This also doesn't allow me to jack the car up because the shock no longer keeps the spring from completely uncompressing.

I am faced with the task of safely uncompressing the spring without the ability to remove the strut/shock/spring assembly as a unit and attaching spring compressors. I have also tried and failed to get spring compressors around the spring while still installed in the car.

Has anyone faced this situation? Is there a creative (and safe) way to uncompress the spring so I can replace my strut tube assembly?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New How to remove the strut assembly safely when the shock top nut has stripped out of the strut tube? [200][1993]
posted by  drj434343 subscriber  on Sun Feb 15 23:18 CST 2015 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.