Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

wiring harness for high mount light 200 1993

posted by  PeterJ on  Wed Feb 25 08:07 CST 2015
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]


Hi folks-

I'm a newbie to this site so bear with me please. I have a '93 240 wagon. It failed inspection recently because the high mount light doesn't work. Bulb is fine. Mechanic says the wiring harness for the light needs to be replaced but he can't locate a wiring harness for that light so he wants to splice the existing harness to fix the problem. He says it's a 2-3 hour job so labor only, no parts. I did find a used harness on car-part.com that apparently will work. The seller told me I can even fix it myself and that there's probably step-by-step instructions on this board. I did a search before sending this message but no luck. So, can I fix this non-working high mount bulb problem myself with this used wiring harness and, if so, how?

Thanks very much,
Peter






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New wiring harness for high mount light [200][1993]
posted by  PeterJ  on Wed Feb 25 08:07 CST 2015 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.