Volvo RWD 444-544 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2002 444-544 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Front Oil Seal (Crank) 444-544

posted by  Retired on  Thu Apr 30 09:08 CST 2015
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Sep 11 09:10 CST 2014
[RELATED]


Hello Everyone; Just had the timing cover machined, to accept the Neoprene style oil seal on a 1970 B20E. The seal was a "press fit" during installation. Question- are these seals "stepped" with regards to measurements, as I now have a very small part of the seal that still extends outside and past the cover. Consequently the Crank Pulley now slightly rubs the exterior of the seal during rotation.
My research did not reveal anyone else having this concern.

Thks.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Front Oil Seal (Crank) [444-544]
posted by  Retired  on Thu Apr 30 09:08 CST 2015 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.