Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Installing new header and catalytic with donut 200 1989

posted by  CineMan on  Tue May 12 14:40 CST 2015
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Sep 30 15:21 CST 2014
[RELATED]

1989 244DL with EGR AW70

I'm wondering what order I should install things. I have everything after the exhaust manifold removed from the car. Everything after the cat is still connected together. I have a new header and cat to install with the metal donut.

Should I connect the cat and header on the ground first and then install them? Should I bolt the cat to everything behind it install that and then fit the header pipe in? Or should I install the header to the manifold first and then connect everything after it?

I also don't really understand the donut. Is there a trick to installing it so there will be no leaks? It seems like it would be easier to install with the pipes out of the car.

Thanks!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Installing new header and catalytic with donut [200][1989]
posted by  CineMan  on Tue May 12 14:40 CST 2015 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.