Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

To Test The IAC 200 1992

posted by  Bradley on  Thu Jun 18 12:10 CST 2015
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 12:56 CST 2014
[RELATED]

Bought a used idle air controller, since I'm getting tired of the 'roller coaster' idle that the installed one occasionally produces. I'd like to test it before installing it by quickly applying voltage to it, to verify that the solenoid properly moves the air vane. Question is which of the tabs on the connector is hot and which is ground?

Looking at the connector straight-on, with it oriented at the top and the air outlet pointing to the left, is the left or the right pin the + side?

B






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New To Test The IAC [200][1992]
posted by  Bradley  on Thu Jun 18 12:10 CST 2015 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.