Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Removing old adhesive from door molding - easy method? 200

posted by  jon_h on  Fri Jun 26 20:47 CST 2015
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 11:57 CST 2014
[RELATED]

Removed old adhesive from this lower door molding with Color Tile brand "Adhesive and Old Paint remover" which I purchased ~25 years ago for a house project. Don't know what's in it or if it's still made.

Brushed on, let sit ~5 minutes, got most pieces off in long strips by pushing a putty knife underneath and lifting gently. It's probably not a product for use on plastic but the molding didn't soften or discolor.

Have tried oven cleaner, acetone, lacquer thinner, denatured alcohol, other solvents with marginal success ie. all required heavy scraping.
--
240 drivers / parts cars - JH, Ohio







THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Removing old adhesive from door molding - easy method? [200]
posted by  jon_h  on Fri Jun 26 20:47 CST 2015 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.