Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Installing outer tie rod ends 200 1981

posted by  tirekiller on  Mon Nov 30 00:50 CST 2015
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I have a 1981 244 and crashed it into a boulder and a tree a little less than a year ago. Part of getting it back on the road is a lot of front end work, and I am almost done except one: I dont know if the bolt thing on the outer tie rod end faces up or down and 2: because it uses a lock nut and the bolt spins freely, it seems impossible to tighten the bolt at all. How do I get that bolt tight? Thank you in advance for any advice you may have to offer.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Installing outer tie rod ends [200][1981]
posted by  tirekiller  on Mon Nov 30 00:50 CST 2015 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.