Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2005

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

engine swap and now loss of current to car

I did an 240 engine swap. I put a 1993 engine in a 1989 Volvo 240 . I swapped the intake,exhaust and wiring harness on the new engine and put back in the car.I now do not have any current to the following....instrument cluster,fuse box or lights. With a test light i checked and do have current to the fuel pump relay,alternator,in and out of 25 amp fuse in engine compartment and of course in and out of starter. I do not know what to do now. Any help appreciated.I am not electrically inclined. i would also speak to someone that might be willing to help. Thanks, Gale 720-987-0037






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New engine swap and now loss of current to car
posted by  someone claiming to be gale  on Thu Jan 28 14:12 CST 2016 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.