Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

re: 87 245 auto - rear passenger stuck caliper piston 200 1987

posted by  Swedish Baklava on  Sat Feb 20 10:19 CST 2016
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 06:40 CST 2014
[RELATED]

Hi All,

Another issue came up...

photo 20160219_121104_zpstffdwcud.jpg
It looks like the inside caliper piston is stuck from the beginning, see the top pad. The caliper was replaced 2 years ago due to leaky bleeder screw and it has around 57,000 miles. I bought it from Autozone and brake fluid flush was performed every 30,000 miles.

photo 20160220_100923_zpsha9pfgef.jpg
I sprayed some PB blaster around the stuck piston and applied brake pressure but it's not budging at all. So I decide to put the old worn out pad by stuck piston side and hoping that gap will create the pressure and release the stuck caliper piston as I drive around. Is this good idea or bad? Please let me know.

As always, thank you.

PS
Using Volvo brake pads(Made in India) & ATE brake fluid.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 re: 87 245 auto - rear passenger stuck caliper piston [200][1987]
posted by  Swedish Baklava  on Sat Feb 20 10:19 CST 2016 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.