Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2019 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Installing early aluminum fan in a late car, possible? Dumb idea? 200 1991

posted by  Epic2112 on  Thu Feb 16 12:24 CST 2017
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 20 12:15 CST 2014
[RELATED]

I was at the pick & pull and there was a 75 245. I saw it had an old aluminum radiator fan, so I pulled it, along with the clutch and spacer (basically everything all the way back to the water pump).

I'd like to put this fan on my B230 equipped car, but only because I could powder coat it and make it look nicer than the plastic fan.

The clutch for the aluminum fan is clearly different from the plastic fan clutch, so I can't just mount the aluminum fan to the newer clutch. The bolt size and spacing also seems to be different for the clutch-to-waterpump bolts for the B19 (vs my B230).

I also don't see the old type of clutch available on rockauto or my other usual part sources, so maybe this can't be done at all (I don't want to re-use the junkyard clutch), but does anyone know if it can be done?

If it can be done, is it a bad idea? Are the aluminum fans in some way inferior to the later plastic ones?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Installing early aluminum fan in a late car, possible? Dumb idea? [200][1991]
posted by  Epic2112  on Thu Feb 16 12:24 CST 2017 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.