Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2005

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Tips for old lenses - all models

posted by  james_a_sousa on  Thu Mar 30 11:45 CST 2017
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 18:51 CST 2014
[RELATED]

A couple of tips for old plastic lenses -

1 - Do your old lenses have fine shallow cracks? - especially front turn signal lenses when they are in the sun.

Paint them with liquid glue, such as Testor's plastic glue (I actually suspect that it is acetone) This will seal many of the cracks as it melts the plastic.

DO NOT Play with the glue as it sets, just paint them with a nice wet once over and let the glue dry for several hours. Then touch up spots that did not seal

2 - Check the lenses to see if they glue that holds them to the reflector has come loose - repair as necessary.

It is not much fun to get out of your Brick after a trip on the highway and find that one of your lenses is gone!

Add your tips.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Tips for old lenses - all models
posted by  james_a_sousa subscriber  on Thu Mar 30 11:45 CST 2017 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.