Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

mutant 240 brake issues 200 1986

posted by  BonesandFeathers on  Mon Jun 5 15:42 CST 2017
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Jul 4 00:36 CST 2014
[RELATED]

All I wanted to do is change one set of front hub bearings...
So after i changed my front right side hub bearings,,,,i had a leaky caliper...so i replaced it...bled it with a pneumatic brake bleeder...well that didn't work..so I bought a new master cylinder,,,,on the off chance i had scored the seals on the m/c..well that didn't work... I bled the M/C on the car....I put caliper nipples on the m/c and pumped till my observer said there were no more bubbles..
Hitched it up and the brake pedal went to the floor..
I don't see any bulging or leaking soft lines...I tried bleeding according to ritual...por nada...I don't see any leaks, bulges,puddles. or other obvious leaks...
So where's the air coming from...I haven't a clue.

all comments, an ideas greatly appreciated

Paul in LA trapped in the driveway by parts hungry cars






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New mutant 240 brake issues [200][1986]
posted by  BonesandFeathers subscriber  on Mon Jun 5 15:42 CST 2017 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.