Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Steering Wheel Contact to contact reel for horn 200 1993

posted by  740gt on  Sun Sep 17 08:47 CST 2017
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Sep 29 12:51 CST 2014
[RELATED]

1993 VOLVO 240 DL- The horn does not work- the horn itself is good. I have removed the SRS airbag/locked the contact reel/the steering wheel-
Here is the question-on the back of the steering wheel (facing the dash when installed) there is a white plastic cylinder that is even with the wheel surface. There is a BLACK WIRE-that comes from the horn contact (back side)that is fed into the white plastic cylinder 1/8 inch dia. approx. I could not push the wire in further from the backside to allow it to protrude to make contact with the contact reel.

Is this supposed to have a contact protruding to make contact with the CONTACT REEL surface?

In other words has this piece broken off?

Any advice or photos would be helpful.

Thanks in advance






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Steering Wheel Contact to contact reel for horn [200][1993]
posted by  740gt  on Sun Sep 17 08:47 CST 2017 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.