Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2010 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

engine side face of crank gear has a notch but nothing to key into it? 200 1988

posted by  tbb2 on  Tue Sep 19 15:19 CST 2017
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Jul 16 18:57 CST 2014
[RELATED]

In process of disassembly for timing belt and oil seal replacement.

When the crank gear and back washer come off I can see a notch on the inside of the washer and a mated indentation in the back of the gear. The notch is rounded on the closed side and the indentation matches it. The front washer indentation is squared off as is the numb that fits into it.

I do not feel anything on the crankshaft that would key into these back side notches. I suppose once the gear is tightened it holds the washer in place but there is no assurance the notch and indentation line up.

Does anyone know what the notch and indentation are for?
Did something fall out?

--
1988 244 DL; B230F; LH-2.2; Manual 5-speed (M47)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New engine side face of crank gear has a notch but nothing to key into it? [200][1988]
posted by  tbb2 subscriber  on Tue Sep 19 15:19 CST 2017 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.