Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2019 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

top radiator to transmission connector very stiff 900 1992

posted by  muskox37 on  Fri Jul 26 14:02 CST 2019
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 8 11:54 CST 2014
[RELATED]

I am trying to remove the radiator on my 960 so that I can create some space to remove a broken bolt. The top connector to the radiator is very tight and I am worried that I will break the plastic side compartment of the radiator if I apply too much torque.

I have applied PB Blaster and some tiger piss to the connector and I am letting it wait overnight.

It is a 17mm connector and I applied as much force as I could muster to the fairly large wrench without moving it. I also tapped it both ways to see if I could loosen it. No luck so far.

I am afraid of using a cheater to get more torque on the wrench because it could tear the whole connector loose from the plastic and a new radiator would be on the horizon.

Any thoughts?

I am trying to upload an image but as per usual I am failing.


Bob







THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New top radiator to transmission connector very stiff [900][1992]
posted by  muskox37  on Fri Jul 26 14:02 CST 2019 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.