The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

top radiator to transmission connector very stiff 900 1992

I am trying to remove the radiator on my 960 so that I can create some space to remove a broken bolt. The top connector to the radiator is very tight and I am worried that I will break the plastic side compartment of the radiator if I apply too much torque.

I have applied PB Blaster and some tiger piss to the connector and I am letting it wait overnight.

It is a 17mm connector and I applied as much force as I could muster to the fairly large wrench without moving it. I also tapped it both ways to see if I could loosen it. No luck so far.

I am afraid of using a cheater to get more torque on the wrench because it could tear the whole connector loose from the plastic and a new radiator would be on the horizon.

Any thoughts?

I am trying to upload an image but as per usual I am failing.


Bob







USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.