Volvo RWD 444-544 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2018 444-544 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

No useable clutch pedal, despite new linkage / clutch 444-544 1964

posted by  Dylan Berichon on  Wed Aug 21 11:35 CST 2019
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 17:22 CST 2014
[RELATED]

I've been putting the finishing touches on a B20 build for my '64 544. Part of that included a new clutch (because, well, it would be silly not to.)

The motor / crank comes from a 1975 240, so it is of the 8 bolt variety (though I don't know why that would matter much.) I ordered an OEM Sachs clutch kit.

With everything installed and the adjuster run out as far as it goes, there is barely any usable clutch, MAYBE about 2 inches from the floor (if not less). At first I thought it was the result of sloppy linkage pieces, but those have all been replaced with new parts.

As best I can tell, the clutch fork doesn't appear to be bent.

As it is, the car isn't really driveable. I'm stumped. Any ideas or suggestions would be appreciated.

Thanks as always.
--
http://dylans544.blogspot.com






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New No useable clutch pedal, despite new linkage / clutch [444-544][1964]
posted by  Dylan Berichon  on Wed Aug 21 11:35 CST 2019 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.