The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

No useable clutch pedal, despite new linkage / clutch 444-544 1964

I've been putting the finishing touches on a B20 build for my '64 544. Part of that included a new clutch (because, well, it would be silly not to.)

The motor / crank comes from a 1975 240, so it is of the 8 bolt variety (though I don't know why that would matter much.) I ordered an OEM Sachs clutch kit.

With everything installed and the adjuster run out as far as it goes, there is barely any usable clutch, MAYBE about 2 inches from the floor (if not less). At first I thought it was the result of sloppy linkage pieces, but those have all been replaced with new parts.

As best I can tell, the clutch fork doesn't appear to be bent.

As it is, the car isn't really driveable. I'm stumped. Any ideas or suggestions would be appreciated.

Thanks as always.
--
http://dylans544.blogspot.com






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.