Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Inner tie rod replacement - pipe wrench? 200

posted by  woodshavings on  Sat Sep 19 17:29 CST 2020
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 08:22 CST 2014
[RELATED]

Getting ready to replace my tie rods with a kit from FCP. The new inner tie rods do not have the indents I expected to accommodate an inner tie rod tool. Rather, they are completely round. I've done a fair number of tie rod replacements, but this is the first on a 240 and this was unexpected.

What's the proper way to install the new inner tie rods?

Here is the kit: https://www.fcpeuro.com/products/volvo-tie-rod-kit-inner-outer-240-244-245-lemforder-kit

Thanks!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Inner tie rod replacement - pipe wrench? [200]
posted by  woodshavings  on Sat Sep 19 17:29 CST 2020 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.